Onebusaway for Puget Sound

Service Alert Text Here

• Link shuttle buses will replace 2 Line trains between South Bellevue and Int'l District/Chinatown stations for scheduled maintenance on Sunday, July 26.
  
  2 Line will continue operating between Downtown Redmond to South Bellevue stations with 10 minutes between trains. Link shuttle buses will run approximately every 10 to 15 minutes between South Bellevue and Int'l District/Chinatown stations.
  
  2 Line trains will not operate from the International District/Chinatown to Lynnwood City Center stations. Please use 1 Line trains. If you seek to travel through the 2 Line alignment to Bellevue and Redmond, transfer to Link shuttle buses at the International District/Chinatown station.
  
  1 Line trains will operate every eight minutes between Lynnwood City Center and Federal Way Downtown stations.
  
  Please plan ahead for additional travel time.
  
  Select the link below to view our alternative service options.
  
• Redmond Technology Station - Elevator 1 unavailable until further notice due to maintenance.
  
  To ride the 2 Line:
  
  Entering from the Pedestrian Bridge or Parking Levels:
  
  1. Cross the small pedestrian bridge to the adjacent elevator.
  2. Take the elevator to the platform.
  
  To exit the station:
  
  To the Street (156 Ave NE):
  
  1. Cross the tracks to exit the station.
  
  To the parking levels or pedestrian bridge:
  
  1. Cross the tracks to the adjacent elevator near the parking garage.
  2. Take the elevator to the desired level.
• East stairwell at South Bellevue Station Garage is closed
  
  The east stairwell in the center of the South Bellevue Station Garage is closed until further notice due to needed maintenance. To exit the garage, please use the stairwells located along the perimeters of the north and south ends.
  
  Affected lines:
  2 Line
• Elevator outage at University of Washington Station. The elevator at the Husky Stadium exit serving the street (Montlake Blvd NE), pedestrian bridge, and platform is out of service.
  
  To ride the 1 Line:
  
  1. Take the elevator located directly across from the out of service unit down to the platform.
  
  To exit the station:
  
  1. Take the nearby elevator located directly across from the out of service unit up to the street or pedestrian bridge to Montlake Blvd NE.