Onebusaway for Puget Sound

Service Alert Text Here

• Beacon Hill elevator 4 is unavailable until further notice.
  
  To ride the 1 Line:
  
  Please use the adjacent in-service elevators.
  
  To exit the station:
  
  Please use the adjacent in-service elevators.
• Planned maintenance at International District/ Chinatown Station beginning March 11.
  
  Beginning March 11, work will take place in the plaza above the International District/ Chinatown Station to clean and install bird mitigation on structures and signage. Work is scheduled to last until the end of April and will be completed throughout the plaza level. During 1 Line service hours, station entrances, exits, and elevators will not be impacted. Walkways through the plaza will be temporarily constrained by the work areas, however passenger impact will be minimal.
• Northgate Station Garage Partial Parking Closure
  
  Several parking stalls at Northgate Station Garage are closed off until further notice due to water intrusion issues. These stalls will be closed off until water intrusion issues are resolved to minimize vehicle damage.
  
• Elevator outage at Capitol Hill Station. The elevator at the E Denny Way exit serving the street, South Mezzanine, and platform is out of service. See below for alternate route information.
  
  To ride the 1 Line from the street:
  
  1. Go to Broadway Ave E and turn right toward E John St.
  2. Enter the station at the corner of E John St and Broadway Ave E.
  3. Take the street level elevator down to the North Mezzanine for elevator access to the platform.
  
  To ride the 1 Line from the South Mezzanine:
  
  1. Take the pedestrian walkway toward the west exit.
  2. Take elevator up to the street.
  3. Turn left on Broadway Ave E.
  4. Enter the station at the corner of E John St and Broadway Ave E.
  5. Take the street level elevator down to the North Mezzanine for.
  
  To exit the station from the platform:
  
  1. Go to the opposite end of the platform toward the E John St exit.
  2. Take the platform elevator to the North Mezzanine.
  3. Take the elevator at the North Mezzanine up to the street (E John St & Broadway Ave E) elevator access to the platform.
• Tukwila International Blvd Station is inaccessible to passengers requiring elevator service. See below for alternate route information.
  
  Passengers requiring elevator service must go to another station.
  
  To ride the 1 Line:
  
  1. Go to Bus Bay 1.
  2. Take King County Metro southbound RapidRide A Line to International Blvd & S 176th St for SeaTac/Airport Station.
  3. Take the elevator near Bus Bay 1 up to the pedestrian bridge to enter the station.
  
  To exit the station from the Northgate platform:
  
  1. Reboard the 1 Line.
  2. Exit the 1 Line at International District/Chinatown Station.
  3. Go to the King County Metro Bus Stop at 4th Ave S & S Jackson St.
  4. Take southbound route 124 to return to Tukwila International Blvd Station.
  
  To exit the station from the Angle Lake platform:
  
  1. Board the 1 Line.
  2. Exit the 1 Line at SeaTac/Airport Station.
  3. Go to the King County Metro bus stop at International Blvd & S 176th St.
  4. Take northbound RapidRide A Line to Tukwila International Blvd
  Station.
• University Street North Mezzanine elevators to Benaroya Hall lobby reduced service hours in 2024
  
  The University Street elevators serving the north mezzanine to the Benaroya Hall lobby, near Exit A2, will have reduced hours for public use beginning Tuesday, January 2, 2024. The elevators will be available from 11 a.m. to 2 p.m. Tuesday through Friday, except holidays.
  
  On certain weekends and evenings, the Benaroya Hall Boeing Gallery will offer access to University Street Station from 2.5 hours prior to any public event through its conclusion. See the Seattle Symphony’s calendar of Benaroya Hall events for dates and times of public events.
  
  The elevators will be in service at the specified times. Please use alternate elevators when these elevators are not in service.
• Mount Baker Station elevator outage. The elevator serving the street (27th Ave S) and Angle Lake platform is out of service.
  
  To Angle Lake, passengers requiring elevator service must go to another station.
  
  To ride the 1 Line:
  
  1. Take the elevator up to the Northgate platform.
  2. Take the 1 Line to Beacon Hill Station.
  3. At Beacon Hill Station, transfer to the Angle Lake platform.
  
  Passengers requiring elevator service CANNOT exit from the Angle Lake Platform.
  
  To exit the station:
  
  1. Board the 1 Line.
  2. Take the 1 Line to Columbia City Station.
  3. At Columbia City Station, transfer to the Northgate platform.
  4. Take the 1 Line to return Mount Baker Station.
  5. Passengers can exit Mount Baker Station using the Northgate platform elevator.
  
  The elevator serving the Northgate platform is operating.
• Elevator outage at Pioneer Square Station. The elevator near Exit A serving the North Mezzanine and street level is out of service.
  
  To ride the 1 Line Northgate:
  
  1. Enter Entrance C (2nd Ave & Yesler Way)
  2. Take the elevator down to the Mezzanine.
  3. Take the elevator serving the Northgate platform.
  
  To exit the station:
  
  1. Go to the south end of the platform.
  2. Take the elevator up to the Mezzanine.
  3. Take the elevator at Exit C (2nd Ave & Yesler Way) up to the street.
  
• Late night rider information from Seattle-Tacoma International Airport to Northgate Station.
  
  For service to Northgate via downtown Seattle, from Seattle -Tacoma International Airport:
  
  On weekdays and Saturday, the last train to Northgate Station with service through downtown Seattle departs SeaTac/Airport Station at about 11:58 p.m. All remaining trains will terminate at Beacon Hill Station.
  
  On Sunday’s, the last train to Northgate Station with service through downtown Seattle departs SeaTac/Airport Station at about 11:13 p.m. All remaining trains will terminate at Beacon Hill Station.
  
  Passengers are recommended to exit at Mount Baker Station and use the following King County Metro Routes to travel towards Northgate Station:
  
  • Passengers requiring service to downtown Seattle, please take King County Metro Route 7.
  
  • Passengers requiring service to Capitol Hill Station, please take King County Metro Route 7 to 3rd Avenue and Pike Street, then transfer to King County Metro Route 49 at Pike Street and 4th Avenue.
  
  • Passengers requiring service to University of
• New Variable Messaging Signs will be installed at University Washington Station beginning on Monday, April 8.
  
  New signs will help better communicate service information to passengers. Information displayed on signs at the stations may not be viewable during installation and testing.
  
  There should be minimal impact on how a passenger navigates through the station platform and entry to the station.
  
  University Washington Station scheduled installation: 8 a.m. - 4 p.m., 4/8 until 6/14.
  
  This schedule may be subject to change and updates will be provided when available.
• New variable messaging signs will be installed at Westlake Station beginning Monday, March 18.
  
  New signs will help better communicate service information to passengers. Information displayed on signs at the station may not be viewable during installation and testing. Sign installation at Westlake Station is scheduled from 8 a.m. - 4 p.m., Monday to Friday, 3/18 until 05/17 and is expected to have minimal impact on how passengers navigate the station platform. This schedule may be subject to change and updates will be provided when available.